Tabletop Demonstrator

Knot-tying instruction is a difficult subject to film. If you don't believe me, go onto YouTube and just search for knots. The problem is that the easiest angle to film is from the front, but if you try to follow along and tie the knot, everything is in reverse. The best angle for instruction is from the perspective of the knot-tyer. But most videos from that angle are really jerky as someone attaches the camera to their head to get a "point of view" recording.

So I came up with a PVC contraption, originally called the Knot Demonstrator. It allows you to film directly downwards, which works pretty well for filming knot-tying. But then my wife wanted to digitize some artwork that wouldn't fit in the scanner, and we discovered that the Knot Demonstrator works for that, too. So after a lot of experimentation and changes, I've come up with a stable design that allows you to film and photograph anything from directly above. The new name is Tabletop Demonstrator because it can be used for much more than just knot videos.

Materials:
(All 3/4" sch 40 PVC or fittings)

Tubing:*
Legs -- 4x 21.5"
Crossbeams -- 4x 9"
Z-Beams -- 4x 10.5"
Stabilizers -- 2x 7"
Hidden Connectors -- 6x 1.5"
* A note on lengths: These lengths are set up with my specific camera in mind. Depending on how wide of an angle your camera has, you may need to change the dimensions slightly. If, when you have everything set up correctly, you can see any of the PVC, you either need to shorten the legs or make the Z-Beams or Crossbeams longer.

Fittings:
2 End Caps
8 90-degree elbows
8 Tees

By the way, you may notice that there's an extra Tee between the lower crossbeams. I don't know what it's doing there, but it seemed to be a handy place to put a connector (possibly for future modifications).

Price: Around $10.00, unless you have all the parts lying around (like I do)
Build time: 15 minutes, more if you need to adjust the height or width
Availability of materials: Readily available
Durability: It's PVC. Plenty durable for indoor work
Functionality: Works very well for what it's designed for
Portability: Somewhat large and bulky, but it can fold up into a smaller size (see future post)

UmbrellaPod Redux

I've now built an UmbrellaPod, and I've modified my method slightly. My new method doesn't require destroying the umbrella, but it does require using a hacksaw to cut the PVC. I'm including a drawing below, with all parts labeled, but keep in mind that you do not need to follow my dimensions exactly. Also remember that the two 90 degree elbows are adjustable, and when using the UmbrellaPod, you will want them turned so the PVC Camera Mount is horizontal instead of vertical.

Parts Needed
All PVC Pieces are 3/4" Sch 40

A. One round end cap
B. Two slip tees
C. Two 90 degree slip elbows
D. One 4 foot pipe
E. One 14 inch pipe
F. One 2.5 inch pipe with a
1 inch by 1/4 inch slot cut
in the top and bottom
G. One umbrella
H. One PVC Camera Mount

(Not Pictured)
One 9 inch bungee cord
Two 1.75 inch sections of pipe (between the 90 degree elbows and the tee)


Here is the video version of the above.


Price: $10-15, if you don't already own an umbrella.
Build time: 20 minutes, mostly for cutting the notch in the PVC.
Availability of materials: Readily available.
Durability: As durable as the umbrella you use.
Functionality: A windy day may blow the umbrella around, making the image jerky, but it should work on a non-windy rainy day. Section D can be removed, turning it into a walk-around device.
Portability: About the same as a PVC monopod.

UmbrellaPod

Here's an idea I've had kicking around for a while. Go to your local dollar store and buy a cheap umbrella (not an automatic). Take off the handle, but leave the long neck tube. Slide the tube into a 1/2" or 3/4" PVC pipe, and connect like the diagrams show. Use the PVC Camera Mount (shown in blue) to connect the contraption to your camera (in dark grey), and there you have it.

There are two basic configurations. The first has the camera coming off a pole (in actuality, two pieces of PVC pipe divided by a T connector). The weight of the camera makes it front heavy, but it will allow you to turn the camera sideways for profile shots.



The second design puts the weight of the camera directly over the monopod pole, but it also eliminates the ability to turn the camera sideways.



And of course, you can eliminate the pole altogether and use it for mobile shots.


Price: Under $5.00, if you can find a dollar store umbrella.
Build time: 10 minutes, assuming the handle comes off the umbrella.
Availability of materials: Readily available.
Durability: The PVC is durable; if you buy a cheap umbrella, I doubt it will last too long.
Functionality: Having never built one of these, I can only speculate that with any sort of wind, the umbrella may go flying (once I actually build one, I'll see if I can think of an easy way to secure it). Other than that, I can see how this could come in very handy.
Portability: About the same as a PVC monopod.

SpearPod

So this is my newest creation (at least, that I have a prototype for). I call it a SpearPod, 'cuz it looks like a spear. Clever, eh?



This is a device that works for the most part, with at least one problem. In a breeze, it tends to wobble a bit. I had that problem while filming the YouTube video, but remedied the situation by resting a brick at the base of it to hold it steady. Without a breeze, it's not a big deal.

The other thing is that when you slide the PVC over the stake, it doesn't sit completely parallel, but that can be remedied with the adjusters at the top (see my snowpod video to see how that works). I also wouldn't recommend using a heavy camera, but for compact ones, it works fine.

I envision that instead of the long piece of PVC, a stick could be whittled to fit into the PVC fittings, which would allow you to use this anywhere that has sticks lying about. I'm sure there are plenty of other uses people could come up with. Tell me if you think of anything!

Price: Under $5
Build time: 10 minutes, with the right hand tools.
Availability of materials: Should be available, if you can find the thin walled tubing.
Durability: Medium to High. It should be as durable as a cheap tripod.
Functionality: As long as you can find something to pound the stake into the ground, it's easy.
Portability: You have to carry around a long pole, but it can double as a walking stick.